check
check
check
check
Safety grating is a controller used for safety protection of mechanical equipment. It is often used for fence or edge protection of mechanical equipment. The installation conditions and environmental requirements are as follows:
Installation location: The safety grating should be installed in a position that can effectively block the dangerous area to ensure that the entry of human bodies or objects can be detected in time. The installation height, width, angle, etc. of the safety grating should be determined according to the specific equipment and application requirements.
Installation and fixation: The installation of the safety grating should be firm and reliable. Brackets, screws or other types of fixing devices can be used to ensure stability.
Managing power and signals: Safety light curtains often need to be connected to power and control systems. During installation, ensure that the power supply is stable and reliable and is correctly connected to the grating. In addition, the signal lines of the safety light grating also need to be correctly connected to the control system to ensure normal signal transmission.
Ambient temperature and humidity: The working environment of the safety grating should comply with the temperature range and humidity range indicated in its specifications. Too high or too low temperature may cause the grating to fail to work properly, so attention must be paid to the control of ambient temperature and humidity.
Ambient light: Some safety gratings are sensitive to ambient light, so direct sunlight or other strong light should be avoided during installation to avoid affecting its detection effect.
In short, the installation conditions and environmental requirements of the safety grating should be determined according to the specifications and requirements of the specific product, and follow the relevant installation manuals and instructions. Correct installation and use can ensure the stable performance and reliability of the safety grating.
