M14*65 Flush high pressure Inductive Sensor
- Product Type：KJT-GY14
- Installation Method：Flush
- Detection Distance：3mm
- Working Voltage：10-36VDC
- Output Mode：NPN/PNP NO/NC
- Ambient temperature：-25℃~+70℃
- Outlet metho：Connector M12,4-pin
For the application environment of hydraulic transmission systems, Kaijit provides high-pressure resistant proximity switches that can be used freely in high-pressure, high-temperature and harsh environments. Its shell adopts corrosion-resistant materials and special sealing methods. Depending on the requirements of the application location, various products suitable for high pressures of 0-500bar can be provided. As for the requirements of shell diameter, thread size, etc., our company can also customize and provide them according to the specific needs of users. The sensing and output amplification parts of this product are integrated, and can be effectively controlled directly by a relay without the need for an additional amplifier. The sensor has two ways to output signals: a fixed sealed cable or an M12 plug connector.
| ● Detect various metal objects | DC 2NO |
| ● With surge, overload, short circuit and reverse polarity protection functions | DC 2NC |
| ● Shell material: stainless steel | DC 3NPN NO |
| ● Protection grade IP67(IEC) | DC 3NPN NC |
| ● Ambient temperature:-25℃~70℃ | DC PNP NO |
| DC 3PNP NC |
| Product Model | KJT-GY14 |
| Installation method | Flush |
| Detection distance | 3mm |
| Working temperature | -25℃~+70℃ |
| Specifications | M14-65 |
| Operating Voltage | 10-36V DC |
| Leakage current | <0.1MA |
| Withstand voltage value | 500Bar |
| Ripples | <10% |
| No-load current | <5mA |
| Maximum load current | 200mA |
| Voltage drop | ≤1.5V |
| On-off level | 1000Hz |
| Hysteresis | <15(Sr) |
| Overload protection current | 180mA |
| Short circuit protection | YES |
| Repeat accuracy | <1.0%(Sr) |
| Temperature drift | <10%(Sr) |
| Response time | 0.5ms |
| Connection method | Connector M12,4-pin |
| Protection level | IP67/IP69K |
| Sensing surface material | Ceramic/EP |
| Shell Material | Stainless steel |
| EMC | RFI>3V/M / EFT>1KV / ESD>4KV(contact) |
| Shock/Vibration | IEC 60947-5-2,Part7.4.1 / IEC 60947-5-2,Part7.4.2 |
