How to use tag sensors

• time：2023-10-24 12:53:03
• Click：0

1. Install the label sensor: Install the label sensor correctly at the location that needs to be monitored according to the instructions. Make sure the sensor is properly aligned with the tag to ensure signal reception and transmission.

2. Configure the sensor: According to the instruction manual of the label sensor, use the corresponding software or tools to configure the sensor. This includes selecting the correct frequency, sensitivity and other related settings.

3. Calibrate the sensor: Before using the tag sensor, calibration is usually required to ensure accurate signal reception and transmission. Calibrate the sensor according to the calibration steps in the instruction manual to ensure it is working properly.

4. Test the tag sensor: After the installation and configuration are completed, use different tags for testing to ensure that the sensor can correctly identify and transmit tag information. Test different positions and directions to confirm recognition range and interference.

5. Maintain the label sensor: Regularly check the working status of the label sensor to ensure its normal operation. If any problems or faults are found, repair or replace them promptly.

It should be noted that different tag sensors may have different usage methods and requirements, so you should read the instructions carefully before use and follow the instructions. At the same time, in order to ensure the accuracy and reliability of the label sensor, it is recommended to follow the correct operating procedures and precautions during use.