Product List

KJT Micro Switch Short Push Plunger Type AZ7312L
KJT Micro Switch Short Push Plunger Type AZ7312L

KJT Micro Switch Short Push Plunger Type AZ7312L

  • ●:There are many types of actuators, the action position can be adjusted
  • ●:Shell covered with reinforced plastic, waterproof and oil-proof
  • ●:Type micro switch has higher mechanical strength and impact resistance
  • ●:There are many categories of forward moving machines, and the action position is adjustable.

            There are many types of actuators, and they are designed with adjustable action positions. The shell is covered with reinforced plastic, waterproof and oil-proof. Type micro switch has higher mechanical strength and impact resistance. There are many categories of forward moving machines, and the action position is adjustable. The outer shell is covered in plastic, which is water- and oil-resistant and can withstand a beating.

1

 

Rating

rated voltage

non-inductive load

Non-electrical portability

Inductive load (A)

resistive load

drag paddle

Bulb load

light bulb carry

inductive load

electric

carry

Motor load

Motor portability

CNCNOCNCNOCNCNOCNCNO
125 V AC
250V AC
480V AC
10
       10
       3
3
       2.5
       1.5
1.5
       1.25
       0.75
10

10 2.5
5

3 1.5
2.5
       1.5
       0.75

8V DC 

14V DC

30V DC

125V DC 

250V DC




10
6
8 0.5

0.25
3
3
3 0.4

0.2
1.5 1.5

1.5 0.4

0.2
6
6
6 0.05

0.03
6
6
5 0.05

0.03
5 5

2.5
0.05
0.03



Note:

1. Inductive load: power factor = 0.4, time constant = 7 milliseconds.

2. The inrush current of the bulb load is 10 times of the steady state. The inrush current of the motor load is 6 times the steady state current.

Remark:

1. Electrical load carrying capacity: power factor = 0.4. Time constant = 7 milliseconds.

2. The current carried by the light bulb is 10 times that of the steady state. The current carried by the motor is 6 times that of the steady state.


  Features

operating speed0.01 mm to 50 cm/sec (locking plug type)
Action frequency
120次/minute
Action frequency15MΩ or less
Insulation resistance100MΩ or more (below 500V DC)
voltage1,000VAC, 50/60Hz for 1 minute between non-continuous terminals, 1,500VAC, 50/60Hz for 1 minute between carrying and unloaded current parts and between terminals and ground.
vibrationAction: 10 to 55Hz, 1.5mm dual amplitude
impact

Mechanical durability: 1,000m/sec2 (about 100G, S)

Malfunction durability: 300m/Sec2 (about 30G, S)

ambient temperatureuse: -10 to +80°C
HumidityAbove 95% relative humidity
service lifeMechanical: 10,000,000 times or more (under rated OT value) Electrical: 500,000 times or more
weight60g
Protection levelIEC specification: IP65

 

Action characteristics

Type
AZX7100LAZX7110LAZX7310LAZX7311LAZX7312LAZX7120LAZX7140LAZX7121LAZX7141LAZX7124LAZX7144LAZX7166L
WeightMax
600g600g600g600g600g150g220g180g240g200g280g120g

RF Min

100g100g100g100g100g40g60g50g80g60g100g

PT Max

2.0mm2.0mm2.0mm2.0mm2.0mm13.5   mm8.5mm11mm6.5mm11mm6.5mm250    mm

OT Min

0.8mm5.0mm6.0mm6.0mm6.0mm4.0mm2.5mm3.0mm2.0mm3.0MM2.0MM11MM

md Max

0.8mm0.8mm0.8mm0.8mm0.8mm3.2mm2.0mm2.4mm1.5MM2.4MM1.5MM
OP30.5±0.8MM44±1.2MM21.8±1.2MM33.3±1.2MM33.3±1.2MM

25±1

MM

25±1 MM

40±1 MM

40±1MM50±1.2MM50±1.2MM
FP




35MM32MM
46MM
56MM


2

2

3

5

4

5

Recommended products